Diesel Injector Seat Cutter Set (087-797A)

Features:

• Identify injector "blow-by" exists (see previous page for possible symptoms).
• Gain access to the injectors and remove them.
• Select required reamer onto pilot post and tighten internal hex screw.
• Place assembled cutter into injector recess.
• Using the T bar and socket supplied apply only a small amount of pressure whilst turning the cutter in a clockwise direction only. Use a small amount of light lubricant whilst performing the cut to reduce chattering and help give a flat cut. Do not over cut the seat only remove enough metal to form a good seat.
• Thoroughly clean the seat and remove all swarf.
• Fit injectors as per manufacturers instructions.

Contents：

• FT-797-01-15x19mm Flat Reamer for Universal injector.
• FT-797-02-17x17mm Flat Reamer for Delphi / Bosch injectors (BMW / PSA / Renault / Ford).
• FT-797-03-17x19mm Flat Reamer for Bosch injectors (Mercedes CRD).
• FT-797-04-17x21mm Angled Resmer for Fiat / Iveco.
• T handle x 1.
• Pilot post x 1.

Material：

• CR-MO